网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->预发布刊期->录用待安排稿件


奥氏体变形对超级贝氏体相变和组织的影响
Effects of Ausforming on Superbainite Transformation and Microstructure
徐光,邓鹏,邹航,补丛华
点击:2311次 下载:0次
作者单位:武汉科技大学材料与冶金学院 武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室
中文关键字:超级贝氏体;奥氏体变形;低温等温转变;组织
英文关键字:Superbainite; Ausforming; Low temperature isothermal transformation; Microstructure
中文摘要:设计、冶炼炉一种Fe-Mn-Si系超级贝氏体钢,在Gleebe-1500热模拟实验机上研究了奥氏体变形对低温贝氏体相变和组织的影响。结果表明,奥氏体变形对超级贝氏体组织形貌有很大的影响;奥氏体高温变形缩短贝氏体相变孕育期,但阻滞贝氏体相变体积分数;奥氏体低温变形大大缩短贝氏体相变孕育期,明显促进贝氏体相变过程,转变后贝氏体组织呈现明显的纤维状变形组织特征。
英文摘要:A super-bainite steel of Fe-Mn-Si grade was designed and refined in laboratory. The effects of ausforming on superbainite transformation at low temperature and microstructure were studied through Gleebe-1500 hot simulator. The research results indicate that morphology of superbainite microstructure is greatly influenced by ausforming, the bainite valume fraction is reduced by high temperature ausforming at 860℃ although incubation time of transformation is shortened, and both incubation time of transformation and transformation volume fraction are greatly promoted by low temperature ausforming at 300℃. The microstructure shows the obvious deformed fibre-shape characteristic.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发