网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->预发布刊期->录用待安排稿件


稀土增强Al2O3掺杂钼基复合材料的粉体制备
Rare earth improve the Al2O3 molybdenum matrix composite powder preparation
刘强,魏世忠,徐流杰,张丹丹
点击:2384次 下载:0次
作者单位:河南科技大学 河南省耐磨材料工程技术研究中心
中文关键字:溶胶凝胶;La2O3;Al2O3;钼
英文关键字:sol-gel; La2O3;Al2O3; molybdenum
中文摘要:本文采用溶胶凝胶法制备了稀土掺杂Al2O3增强钼基复合材料的粉体。在此基础上研究了在La2O3与Al2O3在不同掺杂量下对粉体的影响。结果表明:采用溶胶凝胶法制得La2O3/ Al2O3/Mo混合粉体的平均粒径为1-2μm。Al2O3对粉体的均匀性、颗粒分布、粒径大小有一定的影响,Al2O3添加量的增加对粉体的团聚有分散作用.当Al2O3为15v%、La2O3添加量小于2.5%时La2O3对粉体粒径无明显细化作用。
英文摘要:This article prepare the Al2O3 molybdenum matrix composite powder by the sol-gel. Based on this we study research the the average particle size of the mixed powder La2O3/Al2O3/Mo was made by the sol-gel is 1-2μm.the Al2O3 have influence on powder's uniformity、the distribution of particle and the particle size.The volume of addition the Al2O3 is increased have segregation on the reunion of the powder.When the Al2O3 is 15v% and the volume of addition La2O3 is not greater than 2.5% La2O3 have not influence on the Powder particle size. Key words: sol-gel; La2O3;Al2O3; molybdenum
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发