网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->预发布刊期->录用待安排稿件


磷酸盐体系下不同电压对TC4钛合金微弧氧化陶瓷膜层的影响
The Impact of Different Voltage on TC4 Titanium Alloy Microarc Oxidation Ceramic Membrane in Phosphate Setting
雷源源
点击:2470次 下载:0次
作者单位:贵州大学
中文关键字:钛合金 微弧氧化 电压
英文关键字: titanium alloy; microarc oxidation; ceramic membrane
中文摘要:在磷酸盐体系下采用不同电压对TC4钛合金进行微弧氧化处理,在其表面制得陶瓷膜层,利用扫描电镜、X射线衍射以及能谱仪对膜层形貌结构进行分析,并在20%H2SO4溶液中作腐蚀实验。结果表明,膜层的生成相由金红石和锐钛矿构成,随着电压的增加,表面形貌由原先的微孔较小、分布均匀逐渐变到微孔形状不规则,孔径变大,粗糙,并且腐蚀速率提高,耐腐蚀性下降。
英文摘要: Dfferent voltages were used to carry out microarc oxidation process to TC4 titanium alloy in phosphate setting, thus the ceramic membrane was prepared on its surface. XRay , diffractometer, scanning electronic microscope were utilized to analyze the features and structure of the membrane and subject it to erosion test in 20%H2SO4 solution. The results show, Generation phase is composed of rutile and anatase, and as the voltage increases, the feature of the membrane changes from the original small micro pore and even distribution to being larger and rougher pores, higher erosion rate and lower erosion resistance.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发