网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


等离子原位合成Ni-Al基金属间化合物涂层的研究
Study on Ni-Al Based Intermetallic Coating Prepared by Plasma In-situ Synthesis
袁建军, 娄淑梅, 王 涛, 郭凡灿
点击:3467次 下载:0次
作者单位:(山东科技大学 机电工程系, 山东 泰安 271019)
中文关键字:等离子熔覆; Ni-Al金属间化合物; 原位反应
英文关键字:plasma cladding; Ni-Al intermetallic; in-situ synthesis
中文摘要:通过高温等离子光束激发不同配比的Ni、Al、Fe混合粉产生原位反应,利用扫描电镜(SEM)对原位反应获得的涂层的显微结构进行观察,并利用XRD进行成分分析。 结果表明,实验获得的金属间化合物结构致密,并与基体呈冶金结合,其中质量比为1∶1的Ni、Al混合粉末熔覆涂层的主要成分为NiAl,而加入Fe后得到的涂层成分为NiAl和Fe3Al两种金属间化合物涂层。
英文摘要:Plasma excitation was used for in-situ synthesis of Ni-Al intermetallic coating. The microstructure and composition of the coating were observed and analyzed with SEM and XRD. The results show that the coating has fine microstructure, when mass percent of Ni powder and Al powder is 1:1, the microstructure of the intermetallic coating is mainly composed of NiAl. Adding reasonable content of Fe to Ni and Al mixed power, the cladding coating is mainly composed of NiAl and Fe3Al.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发