纯铜表面热化学反应陶瓷涂层耐磨性研究
Research on Wear Resistance of Ceramic Coatings on Copper Surface Prepared by Thermo-chemical Reaction Method
马 壮, 孙丽月, 李智超
点击：3318次 下载：0次
作者单位：(辽宁工程技术大学 材料科学与工程学院, 辽宁 阜新 123000)
中文关键字：纯铜； 热化学反应法； 陶瓷涂层； 耐磨性
英文关键字：copper; thermo-chemical reaction; ceramic coatings; wear resistance
中文摘要：在工业纯铜表面分别用料浆法和热化学反应法制备陶瓷涂层，陶瓷涂层骨料为Al2O3、TiO2和ZnO，粘接剂为钠水玻璃。研究了该涂层与基体的结合强度、涂层的抗热震性能、耐磨性，用SEM观察了涂层表面和截面的形貌。用X射线衍射法分析了涂层的相组成。结果表明，热化学反应法制备的陶瓷涂层热固化后，涂层内有NiAl2O4、Al2SiO5新相，且这些新相增加了涂层与基体的结合强度。热化学反应法制备的陶瓷涂层磨粒磨损和粘着磨损的相对耐磨性分别是基体的11.26倍和7.97倍。
英文摘要：The ceramic coating was prepared on copper surface by slurry process and thermo-chemical reaction method.The main components of the ceramic coatings were Al2O3, TiO2 and ZnO. Sodium silicate was used as agglomerant. The bonding strength, thermal vibration resistance properties, wear resistance of the coating were investigated. The surface and cross section morphology and the phases of the coating were observed and analyzed by SEM and XRD. The results show that the phases of Al2SiO5, NiAl2O4 appear in the ceramic coatings. The phases can improve the bonding strength between coating and matrix. The abrasive grain resistance of the coatings is 11.26 times as great as copper, the adhesion resistance is 7.97 times.