网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


XX盖板软氮化工艺在JL-75气体氮化炉上的改进
Improvement on XX Cover Plate Soft-nitriding in JL-75 Gas Nitriding Furnace
刘兵兵
点击:3387次 下载:0次
作者单位:(湖南机油泵股份有限公司, 湖南 衡阳 421400)
中文关键字:软氮化; 氨分解率; 氮势
英文关键字:soft nitriding; ammonia dissociation rate; nitrogen potential
中文摘要:在工厂现有条件下,提出以氨分解率作关键参数,以分三段数值动态控制来代替过去的一段数值控制盖板软氮化工艺,近似用氢碳头对软氮化过程氮势的动态控制,以较低成本提高盖板软氮化硬度合格稳定性;同时以软氮化过程中氨分解率不断提高的数据说明,软氮化在渗层深合格的前提下,工艺周期可以进一步缩短。
英文摘要:On  the  basis  of  existing conditions, with the purpose of decreasing cost and increasing the stability of the  soft  nitriding  hardness, ammonia dissociation rate as the key parameters to dynamically control the soft-nitriding process by three steps was introduced, which similar to dynamically control the soft-nitriding process by hydrogen sensor, instead of original control by only one step. With increasing data of soft nitriding ammonia dissociation rate during soft-nitriding process, the process cycle can be further shortened provided that nitriding depth is within specification.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发