网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


过时效温度对冷轧双相钢组织性能的影响
Effect of Over-aging Temperature on Microstructure and Properties of Cold-rolling Dual Phase Steel
孙婷婷, 唐 荻, 江海涛, 田志强
点击:3127次 下载:0次
作者单位:(北京科技大学 高效轧制国家研究工程中心, 北京 100083)
中文关键字:冷轧双相钢; 马氏体; 抗拉强度; 屈服强度; 过时效
英文关键字:cold-rolling dual phase steel; martensite; tensile strength; yield strength; over-aging
中文摘要:研究了过时效温度(室温~500 ℃)对超高强低碳冷轧双相钢力学性能的影响。研究表明,随着过时效温度升高,马氏体发生分解,抗拉强度呈现下降的趋势;且在回火过程中,晶粒呈现出明显的长大趋势;过时效温度高于300 ℃时,实验钢出现屈服延伸。该钢种最佳过时效温度以200~300 ℃为宜。
英文摘要:The research  focused on analyzing the effect of over-aging temperature on the mechanical  properties and microstructure of   super high strength mild cold-rolled dual phase steel. The selected over-aging temperature is from room temperature to 500 ℃.  The results show that, as the over-aging temperature increases, the tensile strength reduces because of the decomposition of martensite, and the growth of grains. When the over-aging temperature is higher than 300 ℃, yield extension breaks out. The best over-aging temperature for this kind of steel is between 200 ℃ and  300 ℃.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发