网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


TC11合金铸锭的微观偏析
Micro Segregation of TC11 Alloy Ingot
王 琛1,2,毛小南2,于兰兰2,高 平1,
点击:3255次 下载:0次
作者单位:(1.东北大学 材料与冶金学院,辽宁 沈阳 110004; 2.西北有色金属研究院,陕西 西安 710016)
中文关键字:TC11;熔炼;微区分析;偏析
英文关键字:TC11; smelting; microcosmic analysis; segregation 
中文摘要:通过对TC11合金进行微区成分研究,得出了TC11合金微观偏析规律。在等轴晶和柱状晶内,沿着晶粒生长方向,元素Al、Mo含量均减小,元素Zr、Si含量均增加。受凝固偏析的影响,四种元素在等轴晶内的偏析程度高于在柱状晶内的偏析程度。在晶界处,α稳定元素Al和中性元素Zr在晶界富集,β稳定元素Mo和Si在晶界贫化。
英文摘要:The micro segregation in TC11 was studied, the rule of micro segregation in TC11 was obtaied. The results show that, in equiaxed grains and columnar grains, the contents of Al and Mo decrease along the directions of the grain growing, but the contents of Zr and Si increase; because of the effects of segregation in the solidification, the micro segregation of the four elements in the equiaxed grains is higher than that in the columnar crystals; Al and Zr are rich on grain boundaries, but Mo and Si are rich in grains.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发