网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


新型环保铝镁硼复合磷酸盐铸造无机树脂粘结剂热硬砂研究
Research on New Environmental Friendly Heat Cured Sand of Al-Mg-B Compound Phosphate Inorganic Binder
夏 露, 黄 晋,张友寿,李四年
点击:3554次 下载:0次
作者单位:(湖北工业大学 机械工程学院,湖北 武汉430068)
中文关键字:铝镁硼复合磷酸盐;超声波振荡;有机高聚物;干强度;抗吸湿性
英文关键字:Al-Mg-B compound phosphate; ultrasonic oscillation; organic polymer; dry strength; humidity resistance
中文摘要:研究了铝镁硼复合磷酸盐铸造无机树脂粘结剂含固量与密度之间的关系,提出通过计算粘结剂的含固量控制合成时的加水量可以简便地获得预期的密度。采用对所研制的粘结剂进行超声波振荡及混砂时加入有机高聚物YPPJ对铝镁硼复合磷酸盐铸造粘结剂热硬砂进行改性。结果表明:超声波振荡可以在一定程度上提高铝镁硼复合磷酸盐铸造粘结剂热硬砂的干强度和抗吸湿性,混砂的同时加入有机高聚物YPPJ,则能使干强度提高2.5倍,抗吸湿性也大大提高。
英文摘要:The relation between solid-containing content and density of Al-Mg-B compound phosphate inorganic binder was studied. It was put forward that the expected density can be obtained easily by calculating solid-containing content to control water addition. The heat cured sand of Al-Mg-B compound phosphate inorganic binder was modified by ultrasonic oscillation to binder and adding organic polymer YPPJ while mixing of sand. The results show that ultrasonic oscillation can improve dry strength and humidity resistance of heat cured sand in some degree, and the dry strength can improve to 2.5 times, the humidity resistance can also improve greatly by using ultrasonic oscillation and adding organic polymer YPPJ while mixing of sand.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发