镁合金电动螺丝刀刀把等温挤压成形研究
Isothermal Extrusion Formation Study of Magnesium Alloy for Electric Screwdriver Hilt
李春天1, 王 昶2, 胡亚民1, 赖周艺1
点击:3363次 下载:0次
作者单位:(1.重庆理工大学 材料科学与工程学院,重庆 400050; 2. 重庆理工大学 汽车学院,重庆 400050)
中文关键字:电动螺丝刀刀把; 等温挤压; DEFORM-3D; 数值模拟; 镁合金AZ31D
英文关键字:electric screwdriver hilt; isothermal extrusion; DEFORM-3D; numerical simulation; AZ31D magnesium alloy
中文摘要:针对镁合金电动螺丝刀刀把零件,设计了等温挤压成形工艺和等温挤压试验模具;利用DEFORM-3D对成形过程进行数值模拟,预测了电动螺丝刀刀把零件成形力为250 kN。采用YAW-500kN微机控制电液伺服压力试验机进行挤压试验,试验证明所设计的成形方案合理可行,同时也验证了数值模拟分析的正确性。
英文摘要:The isothermal extrusion process and dies for electric screwdriver hilt were designed. The deformation process was simulated by using finite element software DEFORM-3D. The formation force of electric screwdriver hilt predicted was 250 kN. The isothermal extrusion was done by pressure machine YAW-500 kN. The rationality of deformation project and correctness of the simulation analysis were verified by the experiment.