网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


热处理对6063铝合金组织与性能的影响
Effect of Heat Treatment on Microstructure and Properties of 6063 Aluminum Alloy
赵爱彬
点击:3368次 下载:0次
作者单位:辽宁石油化工大学 机械工程学院, 辽宁 抚顺 113001
中文关键字:6063铝合金; 热处理; 显微组织; 耐蚀性
英文关键字:6063 aluminum alloy; heat treatment; microstructure; corrosion resistance
中文摘要:利用金相显微镜观察经固溶、时效及固溶+时效处理的6063铝合金的显微组织,通过测试其硬度,得出其随温度变化的规律;并通过全浸腐蚀试验比较其耐腐蚀性,观察其在不同温度下的腐蚀形貌。结果表明,经不同温度处理的材料其显微组织发生明显改变,硬度随温度呈一个波动趋势,随温度升高其耐蚀性下降。
英文摘要:The microstructure of 6063 aluminum alloy after different heat treatment temperature process was observed by metalloscope. The hardness was measured through hardness instrument, the hardness change rule was obtained along with the different temperature. And the corrosion resistance was compared by immersion. The corrosion morphology was observed. The results show that the microstructure have obvious change by different temperature, the hardness assumes a fluctuation tendency along with the change of temperature. Its corrosion resistance decreases along with the temperature elevating.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发