网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


Sb含量对Mg-4Zn-Y合金组织和性能的影响
Effects of Sb Content on Microstructure and Properties of Mg-4Zn-Y Alloy
刘细良, 刘子利, 杨 明
点击:3205次 下载:0次
作者单位:南京航空航天大学 材料科学与技术学院, 江苏 南京 210016
中文关键字:Mg-4Zn-Y合金; Sb; 显微组织; 力学性能
英文关键字:Mg-4Zn-Y alloy; Sb; microstructure; mechanical properties
中文摘要:利用OM,SEM,XRD及力学性能测试等手段,研究了Sb含量对Mg-4Zn-Y合金组织及性能的影响。结果表明,含Sb铸造镁合金Mg-4Zn-Y-xSb的显微组织由基体α(Mg)、二元共晶相Mg7Zn3、三元相I(Mg3Zn6Y)和YSb组成,随着Sb含量的增加,合金晶界上二元共晶相Mg7Zn3的形态逐渐由半连续网状变为分散均匀的颗粒状。合金的拉伸强度、塑性和硬度随Sb含量的增加而提高,但Sb含量过大时合金的综合力学性能下降。
英文摘要:The effects of Sb content on microstructure and properties of  Mg-4Zn-Y alloy were investigated by OM, SEM, XRD and mechanical property test. The results indicate that the as-cast microstructure of the alloy with Sb  consists of  matrix α(Mg),  dual  eutectic  phase, ternary phase I(Mg3Zn6Y) and YSb. The morphologies of the dual eutectic phase Mg7Zn3  on the gain boundaries change from quasi-continuous-net shape to uniformly dispersed particles with the increase of Sb content. The tensile strength, elongation, hardness increase first with the increase of Sb content, but the mechanical properties reduce at the excessive Sb content.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发