网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


改良铸造铝硅合金复合变质处理的研究
Study on Compound Modification of Improved Al-Si Casting Alloy
杨启杰, 苏广才, 王文超
点击:3246次 下载:0次
作者单位:(广西大学 材料科学与工程学院,广西 南宁 530004)
中文关键字:改良; 铸造铝硅合金; 复合变质处理
英文关键字:improvement; Al-Si casting alloy; compound modification treatment
中文摘要:以ZL101为基础,通过添加Cu、Ni、Mn、V和RE等合金元素,研制了改良铸造铝硅合金,并对改良铸造铝硅合金进行了复合变质处理研究。结果表明,复合变质处理对改良铸造铝硅合金是有效的,经复合变质处理后合金的组织表现为单一的α(Al)+共晶Si组织,独立的α(Al)相较少,短共晶Si会聚集长大为长共晶Si,数量较多,强化了α(Al)基体,提高了合金的力学性能。
英文摘要:The modified Al-Si casting alloy was prepared on the basis of ZL101 by adding alloying elements Cu, Ni, Mn, V and RE, and the compound modification of the casting alloy was studied. The results show that the compound modification plays a part in the improvement of the casting alloy; after compound modification, the alloy’s microstructure is  single  α(Al) + eutectic  Si   structure.   The  short  eutectic  Si  gathers,  which  can generates a lot of long eutectic Si, so α(Al) matrix is reinforced and the mechanical properties of the alloy improves.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发