网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


金属铝液对电磁泵用SiC陶瓷的侵蚀
Corrosion of SiC Ceramic for Electromagnetic Pump in Molten Al
韩 涛1, 苏生宝2, 吕海琴2, 程 军1
点击:3528次 下载:0次
作者单位:1.中北大学 材料科学与工程学院,山西 太原 030051;2.山西北方机械制造有限公司,山西 太原 030051
中文关键字:粘土结合碳化硅; Al2O3; 电磁泵; 抗铝液侵蚀
英文关键字:clay-bonded SiC; Al2O3; electromagnetic pump; corrosion resistance to molten Al
中文摘要:研究了电磁泵升液管用粘土结合碳化硅材料在高温铝液中的抗铝液侵蚀性能,用XRD分析试样侵蚀层的相组成,用扫描电子显微镜观察试样侵蚀层的显微结构。结果表明:随铝液温度的提高,碳化硅材料抗铝液侵蚀能力显著降低。随侵蚀时间增长,侵蚀层厚度增加。铝液对粘土结合碳化硅侵蚀属于晶间腐蚀。
英文摘要:The corrosion resistance of clay-bonded SiC for the lift tube of electromagnetic pump in molten Al was studied. The phase composition and microstructure of corrosion layer of the attacked specimen was examined by SEM and XRD. The results show that the anti-erosion ability significantly decreases with the increase of temperature of molten Al. The thickness of corrosion layer significantly increases with the increase of corrosion time. The corrosion of clay-bonded SiC is grain boundary erosion.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发