网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


热处理工艺对α?邛γ逆相变再结晶晶粒细化的影响
Effect of Heat Treatment Process on Grain Refinement Through Recrystallization with α?邛γ Reverse Transformation
肖红亮, 赵英利, 时 捷, 雍岐龙
点击:2853次 下载:0次
作者单位:钢铁研究总院 结构材料研究所, 北京 100081
中文关键字:晶粒细化; 再结晶; 再加热; 逆相变
英文关键字:grain refinement; recrystallization; reheating; reverse transformation
中文摘要:利用Gleeble-1500热模拟试验机,采用α?邛γ逆相变细化奥氏体晶粒的方法,研究了热处理工艺对晶粒细化的影响机制。结果表明:对于非平衡态组织马氏体,在其再加热过程中,原奥氏体晶粒发生了逆相变再结晶,得到了等轴细化的奥氏体晶粒;随回火时间的延长,再加热淬火后的原奥氏体晶粒逐渐粗化;随再加热温度的升高和保温时间的延长,晶粒细化效果减弱。
英文摘要:The effects of heat treatment process on grain refinement of austenite through α?邛γ reverse transformation were studied using Gleeble-1500 machine. The results show that the austenitic grains are formed due to the recrystallization of austenite during reheating process, and austenite grains coarsen with the increase of holding time; the prior austenite grains decreases with the increase of reheating temperature and holding time.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发