高温扩散退火对ZG31Mn2SiREB钢组织及性能的影响
Effect of High-temperature Diffusing Annealing on Microstructure and Mechanical Properties of ZG31Mn2SiREB Steel
王宇飞1,2, 白 翎3, 任凤章1, 罗 影4
点击:3057次 下载:0次
作者单位:(1. 河南科技大学 材料科学与工程学院, 河南 洛阳 471003; 2. 河南省有色金属材料科学与加工技术重点实验室, 河南 洛阳 471003; 3.中国一拖集团有限公司 工艺材料研究所, 河南 洛阳 471004; 4. 兰州理工大学 材料科学与工程学院, 甘肃 兰州 730050)
中文关键字:履带板; 高温扩散退火; 显微组织; 冲击韧度
英文关键字:rack plate; high-temperature diffusing annealing; microstructure; impact toughness
中文摘要:以履带板用钢ZG31Mn2SiREB为研究对象,在880 ℃正常淬火前对其进行1200 ℃高温扩散退火预处理,研究了预处理工艺对其淬火组织和力学性能的影响。结果表明:ZG31Mn2SiREB钢铸态组织粗大不均,直接淬火后组织及显微硬度分布极不均匀,冲击韧度较低;经高温扩散退火预处理后,最终组织均匀细小,显微硬度分布均匀,冲击韧度明显提高。
英文摘要:The per-treatment process of high-temperature diffusing annealing at 1200 ℃ for ZG31Mn2SiREB track plate steel was taken before normal quenching at 880 ℃. The effects of pre-heat treatment process on quenching microstructure and mechanical properties were studied. The results show that the microstructure of ZG31Mn2SiREB as-cast is thick and uneven, the distribution of microstructure and microhardness is extremely uneven after direct quenching, impact toughness is low. The microstructure and microhardness is extremely even after high-temperature diffusing annealing, the impact toughness greatly improves.