网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


30CrSiMoVA钢热压缩流变行为与微观组织的研究
Study on Flow Behavior and Microstructure of 30CrSiMoVA Steel
付 甲, 李永堂, 齐会萍
点击:3558次 下载:0次
作者单位:(太原科技大学 材料科学与工程学院, 山西 太原 030024)
中文关键字:30CrSiMoVA钢; 热压缩变形; 流变应力; 微观组织; 晶粒尺寸
英文关键字:30CrSiMoVA steel; hot compression deformation; flow stress; microstructure; grain size
中文摘要:以Gleeble-1500热物理模拟实验研究为基础,探讨了30CrSiMoVA钢热压缩变形过程中不同变形速率和变形温度对流变应力的影响规律。通过对实验数据进行线性回归分析,确定了30CrSiMoVA钢的应变硬化指数以及形变激活能,拟合出30CrSiMoVA钢高温条件下的流变应力本构方程。此外,采用金相法研究了不同热变形条件对微观组织的影响规律。结果表明,在1050 ℃、10 s-1热变形条件下,晶粒细化最明显。
英文摘要:The influencing rule of various strain rates and temperature on the flow stress of 30CrSiMoV steel during hot compression deformation was investigated based on the analysis of Gleeble-1500 thermo-mechanical simulation experiment. The strain hardening exponent and deformation activation energy were evaluated by linear regression analysis, and the flow stress constitutive equation of 30CrSiMoV steel during hot compression was worked out combined with the experiment data. Besides, the influencing rule of various hot deformation conditions on microstructure was also studied. The results show that the grain size is decreased dramatically on the conditions of hot deformation at 1050 ℃ and 10 s-1.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发