网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


Zr对铸态Mg-7Gd-3Y镁合金组织和性能的影响
Effect of Zr on Microstructure and Mechanical Property of As-cast Mg-7Gd-3Y Alloy
董丽君, 吴安如, 贺 佳, 王克龙
点击:3439次 下载:0次
作者单位:湖南工程学院 机械工程学院,湖南 湘潭 411101
中文关键字: Mg-Gd-Y-Zr镁合金; Zr; 显微组织; 力学性能
英文关键字:Mg-Gd-Y-Zr alloy; Zr; microstructure; mechanical properties
中文摘要:Mg-7Gd-3Y and Mg-7Gd-3Y-0.5Zr magnesium alloy were prepared under the combined protection of magnesium melting cover solvent and argon. The microstructure and mechanical properties of the alloy were analyzed by optical microscopy, X-ray diffraction analysis and tensile test. The effects of Zr on the grain size and room temperature tensile properties of the as-cast alloy were investigated. The results show that Zr addition can immensely refine the grain size, greatly enhance tensile strength and elongation percentage of the as-cast alloy.
英文摘要:在稀土镁合金专用熔剂覆盖和氩气保护下制备了Mg-7Gd-3Y、Mg-7Gd-3Y-0.5Zr两种合金。采用光学显微镜、X射线衍射、室温力学测试对合金的显微组织与力学性能进行了分析,研究了Zr元素对合金晶粒大小及铸态力学性能的影响。结果表明,Zr可以极大地细化Mg-7Gd-3Y合金的晶粒;Zr元素的添加,使合金铸态下的抗拉强度和伸长率均得到了较大提高。
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发