网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


HVOF喷涂制备MCrAlY涂层不同处理后的组织性能分析
Analysis on Microstructure and Properties of MCrAlY Coating by HVOF Sprayed After Different Treatment
陈雄伟, 毕 刚, 唐 慧
点击:3256次 下载:0次
作者单位:(宝钢设备检修有限公司 表面研究所, 上海 201900)
中文关键字:HVOF; MCrAlY涂层; 组织
英文关键字:HVOF; MCrAlY coating; microstructure
中文摘要:采用WokaStar-600(Sulzer Metco公司生产)HVOF喷涂系统制备MCrAlY涂层,并对原涂层、封闭涂层及热震处理后涂层进行了组织形貌分析。结果表明: 涂层中主要为fcc结构 γ-Co(Ni) 和bcc结构β-Co(Ni)Al相;封闭热处理后涂层组织更均匀, 涂层内Al颗粒减少,β相减少,γ相增多,涂层氧化少,硬度增加;热震处理后涂层β-Co(Ni)Al相、Y2O3和Al颗粒增多,硬度降低。
英文摘要:MCrAlY coating was sprayed by WokaStar-600 HVOF system. The microstructure and properties of the as-sprayed coating, sealed and heat-treated coating, and thermal-shock-treated coating were analyzed. The results show that all the coating is composed of fcc γ-Co(Ni) and bcc β-Co(Ni)Al structure. Al particle and β phase in the coating after sealed and heat treatment decline while γ phase increases. The hardness increases after sealed treatment while oxidation decreases, β structure Y2O3, and Al particle increases and hardness decreases in the coating after thermal shock treatment.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发