网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


旋转喷吹除气箱中气液两相流动行为的数值研究
Numerical Study on Gas-liquid Flow Behavior in Rotating Spray Degassing Tank
孙 会
点击:3689次 下载:0次
作者单位:上海电机学院 机械学院, 上海 200240)
中文关键字:旋转喷吹; 气液两相流; 数值模拟
英文关键字:rotating spray degassing; gas-melt two phase flow; numerical simulation
中文摘要:利用欧拉模型和多参考坐标系法对旋转喷吹除气箱中的气液两相流场进行数值模拟,提出基于计算域的选取获取自由液面波动的建模方法,并考察了不同因素对除气箱内气液两相流动行为产生的影响。结果表明,提出的获取自由液面波动的建模方法是可行的。随气泡直径的减小、搅拌转速的增加,气体在除气箱中停留时间延长,与铝熔体接触面积增大,气体在除气箱中的分布得到改善,有利于铝熔体的净化。此外,采用圆柱形除气箱,气体大多聚集在转杆周围,且易发生打漩现象,这对铝熔体的除氢不利。
英文摘要:The Eulerian two-fluid model incorporating with the multiple reference frame method was adopted to simulate the gas-liquid flow field in rotating spray degassing tank, and a new modeling method based on the computational domain was proposed to describe the liquid top surface. The influences of factors on the gas-liquid flow behavior were also investigated. The results show that the modeling method for describing the liquid top surface is feasible. With the decrease of bubble size and the increase of rotational speed, the purging time and melt/bubble interface increase, and purge gas distribution in degassing tank improves, which are beneficial to the refinement of melt. In addition, using the cylindrical tank, the purge gas mainly congregates around the rotational shaft, and swirl always occurs, which is disadvantage to the degassing of hydrogen.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发