网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


外加颗粒强化钢铁材料的研究进展
Research Progress of Iron and Steel Material Strengthened by Particle
黄忠东1,3, 才庆魁1,2, 牛建平2, 黄文力4
点击:3482次 下载:0次
作者单位:(1. 东北大学 材料与冶金学院, 辽宁 沈阳 110004; 2. 沈阳大学 机械工程学院, 辽宁 沈阳 110044; 3. 抚顺职业技术学院 化工系, 辽宁 抚顺 113006; 4. 中国石油抚顺石化公司, 辽宁 抚顺 113008)
中文关键字:钢铁材料; 外加第二相粒子; 作用; 控制; 外加方法
英文关键字:iron and steel material; added second phase particle; effect; controlling; external adding particles method
中文摘要:综述了外加第二相粒子强化钢铁材料的研究进展,分析了第二相粒子对钢的积极作用及不利影响,概述了钢中外加第二相粒子的选取原则,以及钢中第二相粒子的外加方法,指出了钢铁材料中对外加第二相粒子的控制比采用内部析出法要简单。同时,对钢中第二相粒子的内部析出法和外部加入法的差异做了简单的概述。
英文摘要:The research progress of iron and steel material strengthened by adding the second phase particle was summarized. The active effect and unfavorable influence of the second phase particles in steel were analyzed. Selection principle and adding methods for the second phase particles in steel were generalized. The controlling of adding second phase particles in iron and steel material was relatively simpler than that of the internal precipitation method. Moreover, the difference of the internal precipitation method and the external adding method for the second phase particles in steel was generalized.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发