网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


设备线夹开裂失效原因分析
Analysis on Crack Failure of Terminal Connector
徐雪霞1, 欧阳杰1, 冯砚厅1, 杜风贞
点击:3141次 下载:0次
作者单位:(1.河北省电力研究院 锅检技术研究所,河北 石家庄 050021;2.北京有色金属研究总院,北京 100088)
中文关键字:线夹; 失效; 冻裂
英文关键字: terminal connector; failure; frozen crack
中文摘要:通过对某站失效线夹进行现场调研、宏观检验、化学成分分析、力学性能测试、金相检验、断口分析等,综合检验结果,对其开裂失效原因进行了分析。分析认为,天气反复变化导致的冻裂是该设备线夹鼓包开裂的主要原因;其次,表面疏松和粗大柱状晶是开裂的次要促进因素;而线夹镗孔时的偏心导致部分区域孔壁较薄是造成线夹开裂的又一次要诱发因素。
英文摘要:The crack failure of terminal connector was analyzed on the basis of macro-inspection, chemical composition analysis, mechanical property test, metallographic microstructure examination and fracture observation. The analysis shows that the frozen cracks caused by periodic changeable weather is the major cause leading to terminal connector crack; secondly, the surface shrinkage and coarse columnar grain also promotes the failure; in addition, the forming thin wall in boring terminal connector is another inducing factor.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发