Mg-12Li-2Al-2Zn合金化学镀镍工艺的研究
Research on Technology of Electroless Nickel-plating on Mg-12Li-2Al-2Zn Alloy
周荣国1, 章爱生1, 李良彬2, 邓招男2
点击:5440次 下载:0次
作者单位:1. 南昌大学 材料科学与工程学院, 江西 南昌 330031; 2. 江西赣锋锂业有限公司, 江西 新余 338000
中文关键字:镁锂合金; 化学镀镍; 化学镀层; 显微组织; 显微硬度
英文关键字:magnesium-lithium alloy; electroless nickel-plating; chemical coating; microstructure; micro hardness
中文摘要:研究化学镀液pH值、温度及施镀时间对Mg-12Li-2Al-2Zn合金表面镀镍层组织形貌和性能的影响。结果表明:在镁锂合金表面进行化学镀镍的最佳工艺参数是:pH=7±0.2,温度(80±2) ℃,施镀时间50 min。在此工艺条件下,所获镀层厚度13~15 μm,显微硬度435 HV左右,镀层结构为Ni-P非晶态。
英文摘要:The effects of pH value, temperature and time on the microstructure and mechanical properties of electroless nickel-plating on Mg-12Li-2Al-2Zn alloy were investigated. The results show that the appropriate technical parameter of electroless nickel-plating is pH=7±0.2, (80±2)℃, 50 min. In this technical parameter, the hardness of the coating is about 435 HV and the thickness is 13~15 μm. The coating formed on the surface of magnesium-lithium alloy is Ni-P amorphous state.